Filter
Top Products
to the letter mode. Enter the address, and press the call
key.
To set net call as the preferred call type for outgoing calls,
select Menu > Connectivity > Internet tel. >
Options > Settings > Default call type > Internet
call. When your device is connected to a net call service,
all calls are made as net calls.
Net call service settings
Select Options > Settings, scroll to the settings of the
desired service, and press the scroll key.
To login automatically to the net call service, select Login
type > Automatic. If you use the automatic login type
for WLANs, the device periodically scans for WLANs, which
increases the demand on battery power and reduces the
battery life.
To login manually to the net call service, select Login
type > Manual.
To view the networks you have saved for the net call
service and the networks detected by the net call service,
select Saved conn. networks.
To define the service-specific settings, select Edit service
settings. This option is only available if a service-specific
software plug-in has been installed in the device.
Speed dialling
Select Menu > Tools > Settings > Phone > Call >
Speed dialling > On.
Speed dialling allows you to make a call by pressing and
holding a number key in the standby mode.
To assign a number key to a phone number, select Menu >
Tools > Speed dial. Scroll to the number key (2 - 9) on
the display, and select Options > Assign. Select the
desired number from Contacts.
To delete the phone number assigned to a number key,
scroll to the speed dialling key, and select Options >
Remove.
To modify a phone number assigned to a number key,
scroll to the speed dialling key, and select Options >
Change.
Call divert
Select Menu > Tools > Settings > Phone > Call
divert.
Divert incoming calls to your voice mailbox or to another
phone number. For details, contact your service provider.
Select to divert voice or fax calls, and select from the
following options:
• All voice calls or All fax calls — Divert all incoming
voice or fax calls.
• If busy — Divert incoming calls when you have an
active call.
• If not answered — Divert incoming calls after your
device rings for a specified period of time. Select the
time you let the device ring before diverting the call in
the Delay time: list.
• If out of reach — Divert calls when the device is
switched off or out of network coverage.
• If not available — Activate the last three settings at
the same time. This option diverts calls if your device is
busy, not answered, or out of reach.
36