Filter
Top Products
–
Night:
Use this to take photos in low-light conditions, without
using the flash. Press the Shutter button to take multiple photos.
Photos are automatically merged into a single photo.
Quick Settings
Tap at the top of the display to quickly change
Camera settings. Not all of the following options are available
in both still camera and video camera modes. The available
options vary by mode.
Configure Camera settings.
Activate or deactivate the flash.
Use this to activate or deactivate night detection.
Activate or deactivate the voice control to take photos.
Select a resolution for videos.
Activate or deactivate the sharing options.
Hide Quick settings.
Camera and Camcorder Settings
This section describes the different settings that you can
configure on your camera. Not all of the following options are
available in both still camera and video camera modes. The
available options vary by mode.
1. From the viewfinder, tap
(
Quick Settings
) ➔
(
Camera Settings
).
2. The follow settings are located under the Camera,
Camcorder, and General tabs. The settings th
at are
displayed will depend on what camera mode you are
in.
Camera
:
•Photo size
: Select a resolution for photos. Use higher
resolution for higher quality. Higher resolution photos take up
more memory.
•Burst shot
: allows several photographs to be captured in quick
succession by touching and holding the Camera button.
• Face detection
: allows you to adjust the camera focus based
on face detection technology.
Multimedia 71