Filter
Top Products
94 2G. Voice Services
Tips for Adapting Digit Dial
ⅷ Adapt digits in a quiet place.
ⅷ Make sure you wait for the beep before starting to
speak.
ⅷ Speak clearly, but say each digit sequence naturally.
ⅷ If you make a mistake while recording a sequence of
digits, or if there is an unexpected noise that spoils
the recording, you can say or select “No” when the
prompt asks, “Did the recording sound OK?” You will
then be prompted to rerecord the sequence.
ASR Options
To change ASR confirmation:
1. Press and hold or .
2. Press SETTINGS (right softkey) > Confirmation and
select an option.
Ⅲ Automatic to ask for confirmation only when the
system is not sure what you said.
Ⅲ Always Confirm to always ask for confirmation.
Ⅲ Never Confirm to never ask for confirmation.
3. Press to complete the process.
To adapt the system to your voice:
1. Press and hold or .
2. Press SETTINGS (right softkey) > Adaptation >
Adapt Voice.
3. Press START (left softkey), wait for the beep, and
then repeat the words, commands, and digits
using a normal tone of voice.
Ⅲ If the recording is not acceptable, the device will
ask you to repeat the last phrase.
4. When you are finished with a full session, you will
reach a screen that reads, “Adapting.”
5. Press to complete the process.
Note
It is recommended that you perform the complete
adaptation of Digit Dial at least once to achieve the
maximum benefit of this feature. If a partial
adaptation is performed, you should repeat the
process from the beginning.
Sprint M550.book Page 94 Monday, April 13, 2009 1:03 PM