Filter
Top Products
146 3B. Web and Data Services
While connecting, an animation and a “Connecting”
message may be displayed.
Net Guard
When you first connect to the Web, the Net Guard will
be displayed to confirm that you want to connect. This
feature helps you avoid accidental connections. You
can disable the Net Guard in the future by selecting
Always Auto-Connect when the Net Guard is displayed.
To change your Net Guard settings:
ᮣ Highlight and press > Settings > More... >
Data > Net Guard.
Ⅲ Select On to activate the Net Guard.
Ⅲ Select Off to deactivate the Net Guard.
Data Connection Status and Indicators
Your phone displays the current status of your data
connection through indicators at the top of the screen.
The following symbols are used:
Your data connection is active (data is being
transferred); the transmit/receive symbol will
blink to indicate data transmission. During data
usage, you can receive incoming voice calls or
SMS messages; outgoing voice calls can be
made, but the data services connection will
terminate.
Your data connection is dormant (no data is
being sent or received). Though not currently
active, when dormant the phone can restart an
active connection quickly; voice calls can be
made and received.
If no indicator is displayed, your phone does not have a
current data connection. To launch a connection, see
“Launching a Web Connection” on page 145.
Tip
To change the default launch page to the last page
you viewed, press
Menu (right softkey) > Mark this
page and select the Set this as my homepage, select
Save and press OK.
Note
When enabled, the Net Guard appears only once as
long as you have not turned the phone off and on.
Sprint M550.book Page 146 Monday, April 13, 2009 1:03 PM