Filter
Top Products
Contacts
2E. Contacts 73
Adding a New Group
Groups allow you to communicate simultaneously by
sending out a broadcast text message to every
member of a current group.
1. Highlight and press > Contacts.
2. Press OPTIONS (right softkey) > New Group to create
a new Group category.
3. Read the onscreen information and press START
(left softkey).
4. Add multiple entries (two or more) to your new
group by highlighting a name from the list and
pressing . This action places a check mark
alongside the name.
5. Press CONTINUE (left softkey) and enter a name for
the new group. (See “Entering Text in Portrait
Mode” on page 30 or “Entering Text in Landscape
Mode” on page 34.)
6. Press SAVE (left softkey) to assign the selected
entries to the new group.
Selecting a Ringer Type for an Entry
Assign a ringer type to a Contacts entry so you can
identify the caller by the ringer type. (See “Ringer
Types” on page 48.)
1. Display a Contacts entry and press OPTIONS (right
softkey)
> Edit Contact.
2. Highlight the current ring type and press to
display the Select Ringer menu.
3. Select a ringer type, such as Get New Ringers,
Default Ringer, Download Ringers, Other Ringers, My
Videos, or No Ringer.
4. Scroll through available ringers. (To hear a sample
ringer, highlight a ringer type.)
5. Highlight a ringer and press .
6. Press DONE (left softkey) to save the new ringer type.
Note
If several numbers are saved within a single Contacts
entry, you can select from these additional numbers
by using the left or right navigation keys.
Sprint M550.book Page 73 Monday, April 13, 2009 1:03 PM