Filter
Top Products
computer, you should touch a grounded object to discharge any static
electricity from your body.
ᮣ
Do not subject your device to sudden and severe temperature
changes. This could result in moisture condensation in the device
that could cause damage to your device, computer function loss,
and/or the loss of data. In the event of moisture condensation, allow
your device to dry out completely.
ᮣ
It is normal for the AC Adapter to become warm when charging.
ᮣ
Disconnect the power plug from the outlet when not in use.
ᮣ
Take care not to sit on device when it is located in the back pocket of
trousers, etc. This could cause damage to your device or malfunction
of the device functions.
ᮣ
Do not place objects on top of your device or drop them on top of
your device. This could cause damage to your device and/or
malfunction.
ᮣ
Never paint or apply any foreign substance to this device as this can
clog and damage moving parts.
ᮣ
Clean terminals (metallic parts) on a regular basis with a dry cotton
swab. Dirty terminals could affect battery charging.
ᮣ
Never use organic solvents such as benzene or paint thinner to clean
your device. Use of these solvents can cause deformation or
discoloration. Wipe dirty parts with a soft dry cloth.
ᮣ
Do not wipe the display with a damp or wet cloth or touch the
display with damp or wet hands. Wiping or touching the display
under this condition can cause product failure or malfunction.
Always use a soft dry cloth to wipe the display.
ᮣ
When using the optional “SD memory card”, be sure to read the
relevant instruction manual and ensure that you know the proper
procedures for their use and compatibility with your device.
-Never subject the card to any severe shock while connected to your
device. Such a shock can cause damage to the card and a
malfunction.
-Do not carry your device with the card connected to it.
This can result in the damage or loss of the card.
Section 4: Safety Guidelines and Warranty Information
4A: Safety 177
CAUTION
ᮣ
Never raise the sound volume level too high when using your device
with headset. An excessive sound volume level could cause damage
to your hearing.
ᮣ
Never touch the liquid that might leak from a broken liquid crystal
display. Contact with this liquid could cause a skin rash. If the
crystal display liquid should come into contact with the skin or
clothing, wash it immediately with clean water.
NOTE
ᮣ
Under certain conditions, data may be lost, including:
-Failure to follow all instructions for use and warnings in this guide.
-Misuse of your device;
-Subjecting the main unit of your device to static electricity and/or
noise;
-Total loss of electric charge in the built-in battery; and
-Servicing of your device.
ᮣ
Use of your device in locations where the following ambient
environmental conditions are exceeded:
-Under normal operational use ambient temperatures not less than
32°F and not in excess of 104°F (0°C and 40°C);
-With humidity of not less than 30% or in excess of 80%; and
-When charging the battery ambient temperatures not less than 41°F
and not to exceed 95°F (5°C and 35°C).
ᮣ
Do not store or use your device in the following locations:
-Those subject to extremely high or low temperatures;
-Dusty locations; and
-Locations or sites subject to strong vibration.
Use or storage in these location, sites or areas can result in product
failure, malfunction or loss of data.
ᮣ
Avoid connecting your device to an external device such as a
computer in an environment likely to be affected by static electricity.
For example, during low-humidity weather, shuffling your shoes
upon a rug can produce static electricity. Before you handle your
Section 4: Safety Guidelines and Warranty Information
176 4A: Safety
SPRINT~Section3.QXD 02.8.6 6:58 PM Page 176