A SERVICE OF

logo

2.2 Installation
Use the M5 screw holes at the bottom of the counter for installing it to the counter stand or
the main unit of the machine tool.
The external dimensions of the counter and the location of the screw holes for installation
are shown in the figure below.
NOTE
• There are no special installation fixtures supplied with this counter.
• External dimensions given below apply to 1-, 2-, and 3-axis counters.
The fastening torque of screws ranges from 0.0015 to 0.002N • m (0.15 to 0.2kg • m).
NOTE
Fastening with a torque exceeding this range may cause the counter case to be
damaged.
No. 99MBE032A
2-2