3. BASIC OPERATIONS
3.2.3 Switching the coordinate
Moves from the current Coordinate to the specified coordinate.
• Moves from the current Coordinate 3 to Coordinate 5.
KA counter coordinate
Coordinate No. Function
0 A coordinate system that displays coordinate values from the machine
origin. It does not allow zero-setting and presetting. To use this
function, perform either of “3.2.5 Saving and recalling a datum point
using the scale reference point” or “3.2.6 Setting the machine origin
with the AT700 series”.
1 to 9 A coordinate system used for performing usual machining operation.
3.2.4 Zero-set
Resets the display value for each axis to zero.
• Resets the X-axis value to zero.
* Zero-adjustment cannot be performed at coordinate 0.
3.2.5 Preset
Set an arbitrary value onto the arbitrary axis through the key entry. Preset values can be
saved in memory for each coordinate so that they can be retrieved even after the system
power is reset.
• Preset -12.3 for the X-axis.
No. 99MBE032A
3-5
