A SERVICE OF

logo

3.3.11 Changing the unit of measurement
It is possible to switch the unit of measurement between mm and inch (1/25.4).
NOTE
• The indicator “mm” on the front panel turns on if mm is selected. The indicator turns off if
inch is selected.
When the display ON/OFF switch is turned on, the unit set when the switch was turned
off will be displayed.
3.3.12 Saving and recalling a datum point using the scale reference point
Refer to “3.2.5 Saving and recalling a datum point using the scale reference point”.
3.3.13 Setting the machine origin using the AT100 series
Refer to “3.2.6 Setting the machine origin using the AT700 series”.
No. 99MBE032A
3-38