A SERVICE OF

logo

Open as PDF
next previous
Step 3 Enter the Y coordinate of the start point.
Step 4 Enter the X coordinate of the end point.
Use the auto-recall value without modifying it.
Step 5 Enter the Y coordinate of the end point.
Use the auto-recall value without modifying it.
Step 6 Enter the number of divisions.
The maximum number of divisions is 999.
Step 7 Perform the machining.
000 implies the completion of setting, while 010 shows implies the number of
divisions.
In two seconds the display will change to the following, showing that the pitch
machining is ready.
Now it is ready to perform the pitch machining.
Recall the first target point.
No. 99MBE032A
3-22