A SERVICE OF

logo

3.3 Outline of the Lathe Counter
3.3.1 Setting parameters for the lathe counter
When this counter is used as the lathe counter, it is required to modify the initial values of
parameters. For detail refer to “4.3.4 Setting parameters for the lathe counter”.
Also for the method of turning on and off the power, refer to “3.2.1 Turning ON/OFF the
power”.
3.3.2 Lathe counter operation modes
The lathe counter operation modes in the KA counter are as illustrated below.
No. 99MBE032A
3-28