1.2 Name and Function of Each Part
The name and function of each part of the KA counter is given below.
On this product the user can switch between the “standard counter” and “lathe counter”
modes through the selection of related parameter. Since each counter has the specific
display method and key functions, refer to the descriptions corresponding to each counter.
For the method of switching the counter model, refer to Section 4.2.2, Parameters
commonly set on all models.
1.2.1 Main unit
1) Front panel
2
7
3
4
5
1
6
1 Display: Displays the values for the X-, Y-, and Z-axis, with a 1-digit sign and
7-digit number.
2 Sub-display: Displays set coordinates and display units.
3 Zero reset key: Resets the display for each axis to zero.
4 Ten-key pad: Keys used for entering numerical data.
5 Function keys: Keys for controlling the normal basic functions.
6 Display ON/OFF switch: Turns ON/OFF the display on the front panel.
7 Counting unit display: Displays the set unit of measurement.
No. 99MBE032A
1-2
