Open as PDF
The construction and appearance of the machine are illustrated on the layout below.
On the layout, the operators’ workplaces during normal operation are indicated by the
human gures, which are sketched in.
Workplaces and noise level
Normally the ironed pieces are coming into the outlet tray after ironing, where the
operator can take them without any danger.
The sound pressure levels of the machine have been measured at a height of 1.6 m
at the indicated workplaces of the operator. The value for the workplace is 60dB.
It may involve risk to the operator to work on or under
the machine. Work Stay in these areas is only allowed for
authorized personnel, and only when the machine has been
stopped, cooled down and the main switch has been locked
in position "0".
It may involve risk of burning to the operator when taking
the sheets directly from the roll, deeper into the machine
at the outlet tray. Jams should always be taken away by