Filter
Top Products
51
6
-
+
-
+
-
+
-
+
-
+
-
+
+
+
+
+
C1M (coin 1 Medium)
Here, you can adjust the time in minutes and seconds with the + and -
button for middle tariff coin 1. Then press the return button.
C1H (coin 1 High)
Here, you can adjust the time in minutes and seconds with the + and -
button for high tariff coin 1. Then press the return button.
C2L (coin 2 low)
Here, you can adjust the time in minutes and seconds with the + and -
button for low tariff coin 2. Then press the return button.
C2M (coin 2 Medium)
Here, you can adjust the time in minutes and seconds with the + and -
button for middle tariff coin 2. Then press the return button.
C2H (coin 2 High)
Here, you can adjust the time in minutes and seconds with the + and -
button for high tariff coin 2. Then press the return button.
Add XX [default : 00]
This parameter determines the minimum amount to be inserted (in
minutes) before the machine will start. It can be changed with the
+ and - button. Then press the return button.
Y/n ti.St
If the ironing temperature drops below 130°C, the feeding belts stop
running. Select "Yes" or "no" with the + button whether the remaining
time should count down or not. Then press the return button.
Y/n rEmo
Select y (yes) or n (no) by means of the + button if a central operating
system is provided. Then press the return button.
Y/n rM.St. (only if rEmo = Yes)
Select y (yes) or n (no) by means of the + button if a central operating
system is provided, by which a running cycle can be stopped (via
coin 2). Then press the return button.
Y/n Pr.cY (only if rEmo = Yes)
Select y (yes) or n (no) by means of the + button if the cycle contact
musn’t be closed continuously during the cycle. As a result, the contact
can open when the temperature is too low (see ti.St).
End
Press the return button to conrm.