Filter
Top Products
52
6
-
+
+
+
+
-
+
+
+
X . X
X X X X
Technical menu
This is the group of parameters, which effect the technical operation of the ironer. They are programmed in the factory
and normally do not need to be changed.
tEch
Press the return button to continue.
Adr X.X [default : 1]
This is the serial address of the ironer when connected in a network.
Only change when placed in a network. Press the return button to
choose this option.
Dia XXX [default : 325]
Select the roller diameter by means of this parameter. Press the return
button to choose this option.
Len XXXX [default : 1650-2050]
Select the ironer length by means of this parameter. Press the return
button to choose this option.
Elec (Electric heating)
This parameter indicates which heating system is used in the ironer.
Press the return button to choose this option.