Filter
Top Products
77
Inter-Tel
®
Model 8690 User Guide (ITP Mode)
MOVING ON
SPEED DIALING
Speed dialing allows you (and your system administrator) to store frequently dialed
numbers for easy dialing. Each number is stored on your endpoint (Station Speed
Dial) or in the telephone system (System Speed Dial) and is identified by a location
number. Once programmed, you can quickly dial these numbers by entering a feature
code and dialing the desired location number. Because the system supports both sta-
tion and system speed-dial numbers, you can have access to over 1000 stored num-
bers.
You can also use the speed-dial buttons through the Unified Communicator interface
(see page 101). These buttons are not limited in the number you can have and they
display real-time status. The Unified Communicator speed-dial list and the speed-dial
functionality discussed here are not related.
Station Speed Dial
You can program and use up to ten personal speed-dial numbers on your endpoint. To
use a speed-dial button, you must:
• Store the number in a speed-dial location.
• Associate a speed-dial location with the new speed-dial button.
NOTE: You can use the Speed-Dial feature even if your endpoint does not have
programmable feature buttons.
Programming Station Speed-Dial Numbers
To store a speed-dial number, use the Station Speed-Dial Programming feature code
to program the number in a speed-dial location. Use the following table to list the
numbers that you store in speed-dial locations 0-9.
0 _______________________ 5 _______________________
1 _______________________ 6 _______________________
2 _______________________ 7 _______________________
3 _______________________ 8 _______________________
4 _______________________ 9 _______________________