Filter
Top Products
79
Inter-Tel
®
Model 8690 User Guide (ITP Mode)
MOVING ON
System Speed Dial
Your system administrator can store several speed dial numbers in the system speed
dial locations. Depending on the size of your system, you can access up to 1000 or up
to 5000 system speed dial locations, if they have been programmed.
To view and/or dial System Speed-Dial numbers:
1. Dial or press the SPEED DIAL menu button.
2. Press the SYS SPEED DIAL menu button.
3. Dial the location code (000-999 or 0000-4999) for the desired number.
4. Press or the ACCEPT menu button to dial the displayed number.
USING RECORD-A-CALL
NOTE: This feature is not supported on peer-to-peer (P2P) calls. Ask your system
administrator if your endpoint is configured to use P2P audio.
If your telephone system is equipped with a Voice Processor (voice mail), you may
have access to the Record-A-Call feature. If so, you can record an ongoing call as a
mailbox message. You can then retrieve the message, just as you would any other
mailbox message.
NOTE: The Record-A-Call feature remains active after the other party hangs up. This
allows you to append the recorded call with your own message.
To use the Record-A-Call feature while on a call:
1. EITHER, Press and dial .
OR, Press the RECORD-A-CALL menu button.
2. If required, dial the desired mailbox number. (Your endpoint may be pro-
grammed to select the mailbox, or you may be required to dial it.)
You hear a confirmation tone when the Record-A-Call feature is activated.
To turn off Record-A-Call you have the following options:
• Press and dial
.
• Press the CANCEL RECORDING menu button.
• Hang up.
3 8 1
#
3 8 5
3 8 5