Settings
100
Left selection key—Assign a shortcut to the left selection
key ( ) in the idle mode.
Right selection key—Assign a shortcut to the right
selection key ( ) in the idle mode.
Active idle apps—Select the application shortcuts you
want to appear in the active idle. This setting is only
available if Active idle is on.
You can also assign keypad shortcuts for the different
presses of the scroll key. The scroll key shortcuts are not
available if the active idle is on.
Operator logo—This setting is only available if you have
received and saved an operator logo. Select Off if you do
not want the logo to be shown.
Display
Light sensor—Adjust the basic brightness level of the
display to lighter or darker. However, in extreme light
conditions, the brightness of the display is automatically
adjusted.
Power saver time-out—Select the time-out period after
which the power saver and the cover display screen saver
(if selected) is activated.
Light time-out—Select a time-out after which the
backlight of the display is switched off.
Cover display
Personalization—Select from the following:
• Wallpaper—Select the background image displayed on
the cover display in the idle mode.
• Screen saver—Select an image or animation to use as
screen saver on the cover display, and the duration it is
shown.
When you select an image to use as wallpaper or screen
saver, a cropping frame the size of the cover display is
shown on top of the image. You can zoom and rotate
the area of the image. Scroll to move the frame around
the display. To use the area inside the frame, select
Options > Set as wallpaper or Set as screen saver.
You cannot use a copyright-protected image as
wallpaper or screen saver.
• Closing animation—Select a short animation to play
when you close the cover.
• Closing tone—Select a short tune to play when you
close the cover.
• Opening tone—Select a short tune to play when you
open the cover and the device is in the idle mode.
Brightness—Close the fold, and use the volume key to
adjust the brightness on the cover display.
Answer if fold opened—Select Yes if you want to answer
incoming calls by opening the fold.
R1114_en.book Page 100 Thursday, October 19, 2006 3:43 PM