Filter
Top Products
Personalize your device
96
bookmark and start connection to a Web page to
download tones.
If you want the caller’s name to be said when your device
rings, select Options > Customize, and set Say caller's
name to On. The caller’s name must be saved in Addr.
Book.
To create a new profile, select Options > Create new.
3-D tones
3-D tones enable three-dimensional sound effects for
your ringing tones (not all ringing tones support 3-D
tones). Press , and select Settings > 3-D tones.
To enable 3-D tones for all your ringing tones, select 3-D
ringing tones > On.
To change the three-dimensional effect for a ringing tone,
do the following:
1 Select Ringing tone and the ringing tone you want to
change.
2 Select Sound trajectory and from the following
settings:
Trajectory speed—Scroll left or right to adjust the
speed at which sound moves from one direction to
another. This setting is not available for all ringing
tones.
Doppler effect—Select On if you want the ringing tone
to appear to change as you get closer to the device, or
further away from it. The ringing tone appears to
become higher as you get closer to the device, and to
become lower as you get further away. This setting is
not available for all ringing tones.
Reverberation—Select the reverb type.
To listen to the ringing tone with the three-dimensional
effect, select Options > Play tone. To listen to 3-D tones,
use the stereo loudspeakers on your device, or a stereo
headset.
Offline profile
The Offline profile lets you use the device without
connecting to the wireless network. When you activate the
Offline profile, the connection to the wireless network is
turned off, as indicated by in the signal strength
indicator area. All wireless RF signals to and from the
device are prevented. If you try to send messages, they are
placed in the outbox to be sent later. If a Bluetooth
connectivity is activated before entering the Offline
profile, it will be deactivated.
Warning: In the Offline profile you cannot make (or
receive) any calls, except make calls to certain
emergency numbers, or use other features that require
network coverage. To make calls, you must first activate
R1114_en.book Page 96 Thursday, October 19, 2006 3:43 PM