Filter
Top Products
Settings
119
Server name—Enter a name for the configuration server.
Server ID—Enter the unique ID to identify the
configuration server.
Server password—Enter a password to identify your device
to the server.
Access point—Select an access point to be used when
connecting to the server.
Host address—Enter the URL address of the server.
Port—Enter the port number of the server.
User name and Password—Enter your user name and
password.
Allow configuration—To allow receiving configuration
settings from the server, select Yes.
Auto-accept all reqs.—To have your device to ask for your
confirmation before accepting a configuration from the
server, select No.
Network authentic.—Select if network authentication is
used.
Network user name and Network password—Enter your
network user name and password to identify your device to
the server. These options are shown only if network
authentication is used.
Software updates
Note: This functionality may not be available in
your device. Contact your service provider for more
information.
To view or update the current software version of your
device, or to check the date of a possible previous update,
press and select Settings > Dev. mgr..
To check whether software updates are available, select
Options > Check updates.
Make sure that the battery of your device has enough
power or connect the charger before starting the update.
To start the update, select access point. The device starts
to download the device data.
When the data is downloaded, the update description is
displayed. Select Accept to accept the download of the
update package or Cancel to cancel the download. The
download may take several minutes. You can use your
device during the download.
Note: If you install a software update, you cannot
use the device, even to make emergency calls, until the
installation is completed and the device restarted. Be
sure to backup data before accepting the installation
of an update.
Select Yes to install the update or No to install it later by
selecting Options > Install update. The update may take
R1114_en.book Page 119 Thursday, October 19, 2006 3:43 PM