Filter
Top Products
Settings
99
Settings
Config.
To change settings, press , and select Settings >
Config.. and a settings group. Select a setting you want to
change.
Some settings may be preset for the device by your
network operator or service provider, and you may not be
able to change them.
Phone
General
Phone language—Changing the language of the display
texts in your device also affects the format used for date
and time and the separators used, for example, in
calculations. Automatic selects the language according to
the information on your SmartChip card. After you change
the display text language, the device restarts.
Changing the settings for Phone language or Writing
language affects every application in your device, and the
change remains effective until you change these settings
again.
Writing language—Changing the language affects the
characters and special characters available when writing
text and the predictive text dictionary used.
Predictive text—Set the predictive text input On or Off
for all editors in the device. The predictive text dictionary
is not available for all languages.
Welcome note / logo—The welcome note or logo is
displayed briefly each time you switch on the device.
Select Default to use the default image, Text to write a
welcome note, or Image to select an image from My
Stuff.
Reset phone settings—You can reset some of the settings
to their original values. To do this, you need the lock code.
See "Phone and SmartChip," p. 104. After resetting, the
device may take a longer time to power on. Documents
and files are unaffected.
Idle screen mode
Active idle—Use shortcuts to applications in the idle
mode. See "Active idle mode," p. 97.
R1114_en.book Page 99 Thursday, October 19, 2006 3:43 PM