Filter
Top Products
Make calls
74
and displays the name and number. After a timeout of
approximate 2.5 seconds, the device dials the number.
If the recognized address is not correct, select Next to
view a list of other matches, or Quit to cancel voice
dialing.
If several numbers are saved under the name, the device
selects the default number, if it has been set. Otherwise,
the device selects the first available number of the
following: Mobile, Mobile (home), Mobile (work),
Telephone, Tel. (home), and Tel. (work).
Answer or decline a call
To answer a call, press .
To mute the ringing tone when a call comes in, select
Silence.
If you do not want to answer a call, press . If you have
activated the Call forward > If busy function to forward
calls, declining an incoming call also forwards the call.
See "Call forwarding," p. 107.
When you decline an incoming call, you can send a text
message to the caller informing why you cannot answer
the call. Select Options > Send text message. You can
edit the text before sending it. To set up this option and
write a standard text message, see "Call config.," p. 101.
Call waiting
You can answer a call while you have another call in
progess if you have activated Call waiting in Settings >
Configuration > Call > Call waiting. Call waiting is a
network service.
Tip! To change the device tones for different
environments and events, for example, when you want
your device to be silent, see "Profiles—set tones," p. 95.
To answer the waiting call, press . The first call is put
on hold.
To switch between the two calls, select Swap. To connect
an incoming call or a call on hold with an active call and
to disconnect yourself from the calls, select Options >
Transfer. To end the active call, press . The first call
remains active. To end both calls, select Options > End all
calls.
Options during a voice call
Many of the options that you can use during a voice call
are network services. Select Options > Mute or Unmute,
Answer, Decline, Swap, Hold or Unhold, Activate
handset, Activate loudsp., or Activate handsfree (if a
compatible headset with Bluetooth connectivity is
attached), End active call or End all calls, New call,
R1114_en.book Page 74 Thursday, October 19, 2006 3:43 PM