Filter
Top Products
Your Nokia device
15
Insert the SmartChip card and
battery
Keep all SmartChip cards out
of the reach of small children.
Always switch the device off,
and disconnect the charger
before removing the battery.
1 With the back of the
device facing you, press
the release button (1), and slide off the cover (2).
2 Slide the SmartChip card
into the holder until it
clicks. Make sure that the
bevelled corner on the
card is facing the left side
of the device and that the
contact area on the card is
facing down.
To remove the
SmartChip card, slide the
lock to the right and pull
out the SmartChip card.
3 Insert the battery.
4 Replace the back cover.
Switch the device on
1 Press and hold
the power
button ( ).
2 If the device
asks for a UPIN
code or lock
code, enter it,
and press .
The factory setting for the lock code is 12345.
Your device has one internal antenna.
R1114_en.book Page 15 Thursday, October 19, 2006 3:43 PM