Filter
Top Products
Settings
107
Call forwarding
Call forwarding (network service) allows you to divert
your incoming calls to your voice mailbox or another
phone number. For details, contact your service provider.
Select which calls you want to divert and the desired
diverting option. To divert voice calls when your number is
busy or when you reject incoming calls, select If busy. To
set the option on or off, select Activate or Cancel. To
check whether the option is activated, select Check status.
Several diverting options can be active at the same time.
When all calls are diverted, is shown in the idle
mode.
Call barring and call diverting cannot be active at the same
time.
Call restriction
Call restriction (network service) allows you to restrict the
calls that you make or receive with the device. To change
the settings, you need the barring password from your
service provider.
Select the desired restriction option. To set it on or off,
select Activate or Cancel. To check whether the option is
active, select Check status. Call restriction affects all
calls, including data calls.
Call barring and call forwarding cannot be active at the
same time.
When calls are barred, calls may be possible to the official
emergency number programmed into your device.
Network
Your device can automatically switch between the GSM
and UMTS networks. The GSM network is indicated with
in the idle mode. The UMTS network is indicated with
.
Network mode (shown only if supported by the network
operator)—Select which network to use. If you select Dual
mode, the device uses the GSM or UMTS network
automatically, according to the network parameters and
the roaming agreements between the network operators.
Contact your network operator for more details.
Operator selection—Select Automatic to set the device
to search for and select one of the available networks, or
Manual to manually select the network from a list of
networks. If the connection to the manually selected
network is lost, the device sounds an error tone and asks
you to reselect a network. The selected network must have
R1114_en.book Page 107 Thursday, October 19, 2006 3:43 PM