Filter
Top Products
Make calls
73
To have a private conversation with one of the
participants, select Options > Conference > Private.
Select a participant and Private. The conference call is
put on hold on your device. The other participants can
still continue the conference call. After you finish the
private conversation, select Options > Add to
conference to return to the conference call.
To drop a participant, select Options > Conference >
Drop participant, scroll to the participant, and select
Drop.
4 To end the active conference call, press .
1-touch dial a phone number
To activate 1-touch dialing, press , and select
Settings > Config. > Call > 1-touch dialing> On.
To assign a phone number to one of the 1-touch dialing
keys ( — ), press , and select Settings > Spd. dial.
Scroll to the key to which you want to assign the phone
number, and select Options > Assign. is reserved for
the voice mailbox.
To call in the idle mode, press the 1-touch dial key and
.
Voice dialing
Your device supports enhanced voice commands.
Enhanced voice commands are not dependent on the
speaker’s voice, so the user does not record voice tags in
advance. Instead, the device creates a voice tag for the
entries in Addr. Book, and compares the spoken voice tag
to it. The voice recognition in the device adapts to the
main user’s voice to recognize the voice commands better.
The voice tag for an address is the name or nickname that
is saved on the contact card. To listen to the synthesized
voice tag, open the contact card, and select Options >
Play voice tag.
Make a call with a voice tag
Note: Using voice tags may be difficult in a noisy
environment or during an emergency, so you should
not rely solely upon voice dialing in all circumstances.
When you use voice dialing, the loudspeaker is in use. Hold
the device at a short distance away when you say the
voice tag.
1 To start voice dialing, in the idle mode, press and hold
. To start voice dialing with the fold closed, press
and hold . If you are using a compatible headset
with the headset key, press and hold the headset key
to start voice dialing.
2 A short tone is played, and Speak now is displayed. Say
clearly the name or nickname that is saved on the
address card.
3 The device plays a synthesized voice tag for the
recognized address in the selected device language,
R1114_en.book Page 73 Thursday, October 19, 2006 3:43 PM