Filter
Top Products
Personalise your phone
13
display in the standby mode. If the General profile is in use,
only the current date is shown.
To change the profile, press in the standby mode.
Scroll to the profile you want to activate, and select OK.
Tip! When you choose a tone, Tone downloads opens
a list of bookmarks. You can select a bookmark and
start connection to a Web page to download tones.
To modify a profile, select Tools > Profiles. Scroll to the
profile, and select Options > Personalise. Scroll to the
setting you want to change, and press to open the
choices. Tones stored on the memory card are indicated
with . Scroll through the tone list and listen to each one
before you make your selection. Press any key to stop the
sound.
To create a new profile, select Options > Create new.
Offline profile
The Offline profile lets you use the phone without
connecting to the wireless network. When you activate the
Offline profile, the connection to the wireless network is
turned off, as indicated by in the signal strength
indicator. All wireless phone signals to and from the device
are prevented. If you try to send messages, they are placed
in the outbox to be sent later.
Tip! For information on how to change the alert tone
for the calendar or clock, see ‘Personalise your phone’,
p. 12.
Warning: In Offline profile you cannot make calls,
except calls to certain emergency numbers, or use
features that require network coverage. To make calls,
change the profile to activate the phone function. If
the device has been locked, you must enter the unlock
code before you can change the profile and make calls.
Warning: Your device must be switched on to use
Offline profile. Do not switch the device on when
wireless device use is prohibited or when it may cause
interference or danger.
To leave the Offline profile, select another profile, and
select Options > Activate > Yes. The phone re-enables
wireless transmissions (providing there is sufficient signal
strength). If a Bluetooth connection is activated before
entering the Offline profile, it will be deactivated. A
Bluetooth connection is automatically reactivated after
leaving the Offline profile. See ‘Bluetooth connection
settings’, p. 79.
R1105_en.book Page 13 Monday, February 7, 2005 1:31 PM