Filter
Top Products
Tools
87
Right selection key—To assign a shortcut to the right
selection key ( ) in the standby mode, select an
application from the list.
You can also assign keypad shortcuts for the different
presses of the scroll key, by selecting an application from
the list.
Operator logo—This setting is visible only if you have
received and saved an operator logo. You can choose if you
want the operator logo to show or not.
Display
Brightness—You can change
the brightness of the display
to lighter or darker. The
brighness of the display is
automatically adjusted
according to the
environment.
Screen saver timeout—The
screen saver is activated
when the timeout period is
over.
Light time-out—Select a timeout after which the backlight
is switched off.
Call settings
Send my caller ID (network service)—You can set your
phone number to be displayed to (Yes) or hidden from (No)
the person to whom you are calling, or the value may be
set by your network operator or service provider when you
make a subscription (Set by network).
Call waiting (network service)—If you have activated call
waiting, the network notifies you of a new incoming call
while you have a call in progress. Select Activate to
request the network to activate call waiting, Cancel to
request the network to deactivate call waiting, or Check
status to check if the function is active or not.
Reject call with SMS—Select Yes to send a text message to
a caller informing why you could not answer the call. See
‘Answer or reject a call’, p. 22.
Message text—Write a text to be sent in a text message
when you reject a call.
Image in video call—You can deny video sending when you
receive a video call. Select a still image to be displayed
instead of video.
Tip! To change the settings for call diverting, press
, and select Tools > Settings > Call divert. See ‘Call
diverting’, p. 94.
R1105_en.book Page 87 Monday, February 7, 2005 1:31 PM