Filter
Top Products
Connectivity
85
To cancel synchronisation before it finishes, press
Cancel.
2 You are notified when the synchronisation is complete.
After synchronisation is complete, select Options >
View log to open a log file showing the synchronisation
status (Complete or Incomplete) and how many
calendar or contact entries have been added, updated,
deleted, or discarded (not synchronised) in the phone or
on the server.
Device manager
Press , and select Connect. > Dev. mgr.. You may
receive server profiles and different configuration settings
from your network operator, service provider, or company
information management department. These configuration
settings may include access point settings for data
connections and other settings used by different
applications in your phone.
To connect to a server and receive configuration settings
for your phone, select Start configuration.
To allow or deny receiving of configuration settings from a
service provider, select Enable config. or Disable config..
Server profile settings
Contact your service provider for the correct settings.
Server name—Enter a name for the configuration server.
Server ID—Enter the unique ID to identify the
configuration server.
Server password—Enter a password to identify your
phone to the server.
Session mode— Select Bluetooth or Web.
Access point—Select an access point to be used when
connecting to the server.
Host address—Enter the URL address of the server.
Port—Enter the port number of the server.
User name and Password—Enter your user name and
password.
Allow configuration—To receive configuration settings
from the server, select Yes.
Auto-accept all reqs.—If you want the phone to ask for
confirmation before accepting a configuration from the
server, select No.
R1105_en.book Page 85 Monday, February 7, 2005 1:31 PM