Filter
Top Products
Tools
95
Network
Your Nokia 6680 device can automatically switch between
the GSM and UMTS networks. The GSM network is
indicated with in the standby mode. The UMTS
network is indicated with .
Network mode (shown ony if supported by the operator)—
Select which network to use. If you select Dual mode, the
phone uses the GSM or UMTS network automatically,
according to the network parameters and the roaming
agreements between the network operators. Contact your
network operator for more details.
Operator selection—Select Automatic to set the phone to
search for and select one of the available networks, or
Manual to manually select the network from a list of
networks. If the connection to the manually selected
network is lost, the phone sounds an error tone and asks
you to reselect a network. The selected network must have
a roaming agreement with your home network, that is, the
operator whose SIM card is in your phone.
Glossary: A roaming agreement is an agreement
between two or more network service providers to
enable the users of one service provider to use the
services of other service providers.
Cell info display—Select On to set the phone to indicate
when it is used in a cellular network based on
microcellular network (MCN) technology and to activate
cell info reception.
Enhancement settings
Indicators shown in the standby mode:
A headset is connected.
A loopset is connected.
A car kit with Bluetooth technology is connected.
The headset is unavailable, or a Bluetooth connection
to a headset is lost.
Select Headset, Loopset or Bluetooth handsfree, and the
following options are available:
Default profile—To set the profile that you want
activated each time you connect a certain enhancement
to your phone. See ‘Set tones’, p. 12.
Automatic answer—To set the phone to answer an
incoming call automatically after 5 seconds. If the Ringing
type is set to Beep once or Silent, automatic answer is
disabled.
R1105_en.book Page 95 Monday, February 7, 2005 1:31 PM