Filter
Top Products
Your phone
16
Your phone
Clock
Options in Clock are Set alarm, Reset alarm,
Remove alarm, Settings, Help, and Exit.
Press , and select Clock.
To set a new alarm, select Options > Set alarm. Enter the
alarm time, and select OK. When the alarm is active, the
indicator is shown.
To turn off the alarm, select Stop. When the alarm tone
sounds, press any key, or select Snooze to stop the alarm
for five minutes, after which it will resume. You can do
this a maximum of five times.
If the alarm time is reached while the device is switched
off, the device switches itself on and starts sounding the
alarm tone. If you select Stop, the device asks whether
you want to activate the device for calls. Select No to
switch off the device or Yes to make and receive calls. Do
not select Yes when wireless phone use may cause
interference or danger.
To cancel an alarm, select Clock > Options > Remove
alarm.
Clock settings
To change the clock settings, select Options > Settings in
the clock.
To change the clock shown in the standby mode, scroll
down, and select Clock type > Analogue or Digital.
To allow the mobile phone network to update the time,
date, and time zone information to your phone (network
service), scroll down, and select Auto time update. For the
Auto time update setting to take effect, the phone
restarts.
To change the alarm tone, scroll down, and select Clock
alarm tone.
To change the daylight-saving time status, scroll down,
and select Daylight-saving. Select On to add one hour to
the My home city time. See ‘World clock’ on p. 16. When
the daylight-saving is active, the indicator is shown in
the clock main view.
World clock
Open Clock, and press to open the world clock view. In
the world clock view, you can view the time in different
cities.
R1105_en.book Page 16 Monday, February 7, 2005 1:31 PM