Filter
Top Products
Copyright © 2002 Nokia. All rights reserved.
Your phone
22
Cost shown as charging units or currency
• You can set the phone to show the remaining talk-time in charging units or units of
currency. For this, you may need the PIN2 code, see p. 36.
1 Select Options →Settings → Show costs in. The options are Currency and Units.
2 If you choose Currency, a note requesting you to write the unit price is shown. Key in
the cost of your home network charging or credit unit and press OK.
3 Write a name for the currency. Use a three-letter abbreviation, for example, FIM.
Note: When no more charging units or currency units are left, calls may only be
possible to the emergency number programmed into your phone (e.g. 112 or other
official emergency number).
Setting a call cost limit for yourself
1 Select Options → Settings → Call cost limit → On.
2 The phone requests you to enter the limit in units. For this you may need the PIN2 code.
Depending on the Show costs in setting, enter either the amount of charging units or
currency.
When the charging limit you have set yourself is reached, the counter stops at its maximum
value and the note Reset all calls’ cost counter is displayed. To be able to make calls, go to
Options → Settings → Call cost limit→ Off. For this you need the PIN2 code, see p. 36.
Erasing call cost counters - Select Options →Clear counters. For this you need the PIN2
code, see p. 36. To clear an individual event, scroll to it and press .
GPRS data counter
Go to Log→ GPRS
counter.
Allows you to check the amount of data sent and received during packet data (GPRS)
connections. For example, you may be charged for your GPRS connections by the amount
of data sent and received.