Filter
Top Products
Copyright © 2002 Nokia. All rights reserved.
Settings
40
Note: You cannot have barring of incoming calls and call diverting or fixed dialling
active at the same time. See ‘Settings for call diverting’, p. 19 or ‘Fixed dialling’, p.
37.
Network
Network selection
• Choose Automatic to set the phone to automatically search for and select one of the
cellular networks available in your area, or
Glossary:
Roaming agreement - An
agreement between two
or more network service
providers to enable the
users of one service
provider to use the
services of other service
providers.
• Choose Manual, if you want to select the desired network manually from a list of
networks. If the connection to the manually selected network is lost, the phone will
sound an error tone and ask you to select a network again. The selected network must
have a roaming agreement with your home network, that is, the operator whose SIM
card is in your phone.
Cell info display
• Select On to set the phone to indicate when it is used in a cellular network based on
Micro Cellular Network (MCN) technology and to activate cell info reception.
Accessory settings
Indicators shown in
standby mode:
- a headset is
connected.
- a loopset is
connected.
Scroll to an accessory folder and open the settings:
• Select Default profile to select the profile you want to be activated each time when you
connect a certain accessory to your phone. See ‘Profiles’, p. 86.
• Select Automatic answer to set the phone to answer an incoming call automatically after
five seconds time. If the Incoming call alert is set to Beep once or Silent, automatic
answer cannot be in use.
Note: If you are using a loopset, you need to activate it separately. Open the Loopset
folder and select Use loopset→ Yes. If you have activated a loopset, the headset will
use the same settings as the loopset.