Filter
Top Products
Copyright © 2002 Nokia. All rights reserved.
Contacts
45
5 When the voice tag has been successfully saved, the note Voice tag saved is displayed
and a beep sounds. A symbol can be seen next to the number in the contact card.
See Fig. 3, p. 46.
Note: Your phone may have 30 phone numbers to which voice tags are attached.
If the memory becomes full, delete some of the voice tags.
Making a call by saying a voice tag
Note: You must say the voice tag exactly as you said it when you recorded it.
1 In standby mode, press and hold . A short tone is played and the note Speak now
is displayed.
2 When you are making a call by saying a voice tag, the loudspeaker is in use. Hold the
phone at a short distance away from you mouth and face so that the proximity sensor
does not turn the loudspeaker off and say the voice tag clearly.
3 The phone plays the original voice tag, displays the name and number, and after 1.5
seconds dials the number of the recognised voice tag.
• If the phone plays the wrong voice tag or to retry voice dialling, press Retry.
Note: When an application using a data call or GPRS connection is sending or
receiving data, you cannot make a call by using voice dialling. To make a call by
using a voice tag, end all active data connections.
Replaying, erasing, or changing a voice tag
To replay, erase, or change a voice tag, open a contact card and scroll to the number that
has a voice tag (indicated by ) and select Options→ Voice tags→
• Playback - to listen to the voice tag again.
• Delete - to erase the voice tag.
• Change - to record a new voice tag instead of the old one. Press Start to record.