Filter
Top Products
Do Not Disturb
Description Selects whether to enable the Do Not Disturb feature for incoming calls.
Note
• If Do Not Disturb has been enabled on the server, the server
rejects incoming calls and the unit does not receive any calls,
even if you have selected [No] for this setting.
• If you change this setting when [Synchronize Do Not Disturb
and Call Forward] is set to [Yes], the change to this setting is
not immediately applied on this screen. In this case, reload the
screen to confirm that the change is applied.
Value Range
• Yes
• No
Default Value No
3.7.3.4 Call Forward
Unconditional (Enable Call Forward)
Description Selects whether to forward all incoming calls to a specified destination.
Note
• If Do Not Disturb has been enabled on the server, the server
rejects incoming calls and the unit does not receive any calls,
even if you have selected [Yes] for this setting.
• If you have selected [Yes] for this setting and Call Forward has
been enabled on the server, but the forwarding destinations
differ, incoming calls are forwarded to the destination set on the
server.
• If Call Forward has been enabled on the server, incoming calls
are forwarded to the destination set on the server, even if you
have selected [No] for this setting.
• You can synchronize the Do Not Disturb and Call Forward
settings from the Web user interface (® see [Synchronize Do
Not Disturb and Call Forward] in 3.7.3.1 Call Control) or
through configuration file programming (® see
"SYNCHRONIZATION_ENABLE_[1–8]" in 4.7.1 Call Control
Settings).
• If you change this setting when [Synchronize Do Not Disturb
and Call Forward] is set to [Yes], the change to this setting is
not immediately applied on this screen. In this case, reload the
screen to confirm that the change is applied.
Value Range
• Yes
• No
Default Value No
108 Administrator Guide Document Version 2010.03.15
3.7.3 Call Control [Line 1]–[Line 8]