Filter
Top Products
Access Levels (IDs and Passwords)
2 accounts with different access privileges are provided for accessing the Web user interface: User and
Administrator. Each account has its own ID and password, which are required to log in to the Web user
interface.
Account Target User
ID
(default)
Password
(default)
Password Restrictions
User End users user -blank-
(NULL)
• When logged in as User, you can
change the password for the
User account (® see
3.5.3 Change User Password).
• The password can consist of 6 to
16 ASCII characters
(case-sensitive) (® see
Entering Characters in
3.2.2 Accessing the Web User
Interface).
Administrator Network
administrators,
etc.
admin adminpass
• When logged in as Administrator,
you can change the password for
both the User and Administrator
accounts (® see
3.5.2 Administrator
Password).
• The password can consist of 6 to
16 ASCII characters
(case-sensitive) (® see
Entering Characters in
3.2.2 Accessing the Web User
Interface).
Notice
• Only one account can be logged in to the Web user interface at a time. If you try to access the Web
user interface while someone is logged in, you will be denied access.
• You cannot log in to the Web user interface even under the same account as someone who is already
logged in.
• The user password is required to change the settings.
• The IDs can be changed through configuration file programming (® see "ADMIN_ID"
and "USER_ID" in 4.3.1 Login Account Settings).
• You can reset the account IDs and passwords to their factory default settings by performing Reset Web
ID/Password from the base unit or one of the handsets. For details, see 2.1.6 Reset Web ID/
Password.
3.2.2 Accessing the Web User Interface
The unit can be configured from the Web user interface.
50 Administrator Guide Document Version 2010.03.15
3.2.2 Accessing the Web User Interface