Filter
Top Products
SHARED_USER_ID_[1–8]
Parameter Name Example SHARED_USER_ID_1, SHARED_USER_ID_2, …,
SHARED_USER_ID_8
Value Format String
Description Specifies the unique ID used by the SIP server when
"SHARED_CALL_ENABLE_[1–8]" is set to "Y".
Value Range Max. 24 characters
Default Value Empty string
Web User Interface Reference Unique ID of Shared Call (Page 106)
SYNCHRONIZATION_ENABLE_[1–8]
Parameter Name Example SYNCHRONIZATION_ENABLE_1, SYNCHRONIZATION_ENABLE_2,
…, SYNCHRONIZATION_ENABLE_8
Value Format Boolean
Description Specifies whether to synchronize the Do Not Disturb and Call Forward
settings, configured via the Web user interface or phone user interface,
between the unit and the portal server that is provided by your phone
system dealer.
Note
• Even if you specify "Y", this feature may not function properly if
your phone system does not support it. Before you configure
this setting, consult your phone system dealer.
• You cannot set both "SHARED_CALL_ENABLE_[1–8]" and
"SYNCHRONIZATION_ENABLE_[1–8]" to "Y" at the same
time.
Value Range
• Y (Enable Do Not Disturb/Call Forward synchronization)
• N (Disable Do Not Disturb/Call Forward synchronization)
Default Value
N
Web User Interface Reference Synchronize Do Not Disturb and Call Forward (Page 106)
PRIVACY_MODE_[1–8]
Parameter Name Example PRIVACY_MODE_1, PRIVACY_MODE_2, …, PRIVACY_MODE_8
Value Format Boolean
Description Specifies whether to enable privacy mode, which prohibits another
handset or base unit from barging in on a conversation.
Document Version 2010.03.15 Administrator Guide 177
4.7.1 Call Control Settings