Filter
Top Products
Web User Interface Reference Enable Firmware Update (Page 118)
FIRM_VER_EUDECT
Value Format String
Description Specifies the firmware version of the DECT system.
Note
• DECT is a widely used cordless phone system in Europe.
• Changing this setting may require restarting the unit.
Value Range Max. 5 characters ("nn.nn" [n=0–9])
Default Value 00.00
FIRM_VER_USDECT
Value Format String
Description Specifies the firmware version of the DECT 6.0 system.
Note
• DECT 6.0 is a widely used cordless phone system in North
America.
• Changing this setting may require restarting the unit.
Value Range Max. 5 characters ("nn.nn" [n=0–9])
Default Value 00.00
FIRM_UPGRADE_AUTO
Value Format Boolean
Description Specifies whether to display a confirmation message asking the user
to perform a firmware update (manual) or perform the firmware update
without asking the user (automatic) when the unit detects a newer
version of firmware.
Note
• This setting is available only when
"FIRM_UPGRADE_ENABLE" is set to "Y".
• Changing this setting may require restarting the unit.
Value Range
• Y (Enable automatic firmware update)
• N (Disable automatic firmware update)
Default Value
Y
Web User Interface Reference Update Type (Page 118)
142 Administrator Guide Document Version 2010.03.15
4.3.4 Firmware Update Settings