Filter
Top Products
DIAL_PLAN_NOT_MATCH_ENABLE_[1–8]
Parameter Name Example DIAL_PLAN_NOT_MATCH_ENABLE_1,
DIAL_PLAN_NOT_MATCH_ENABLE_2, …,
DIAL_PLAN_NOT_MATCH_ENABLE_8
Value Format Boolean
Description Specifies whether to enable dial plan filtering so that a call is not made
when the dialed number does not match any of the dial formats
specified in "DIAL_PLAN_[1–8]".
Value Range
• Y (Enable dial plan filtering)
• N (Disable dial plan filtering)
Note
• If set to "Y", the dialed number will not be sent to the line when
the number dialed by the user does not match any of the dial
formats specified in the dial plan.
• If set to "N", the dialed number will be sent to the line, even if
the number dialed by the user does not match any of the dial
formats specified in the dial plan.
Default Value
N
Web User Interface Reference Call Even If Dial Plan Does Not Match (Page 107)
SHARED_CALL_ENABLE_[1–8]
Parameter Name Example SHARED_CALL_ENABLE_1, SHARED_CALL_ENABLE_2, …,
SHARED_CALL_ENABLE_8
Value Format Boolean
Description Specifies whether to enable the Shared Call feature of the SIP server,
which is used to share one line among the units.
Note
• You cannot set both "SHARED_CALL_ENABLE_[1–8]" and
"SYNCHRONIZATION_ENABLE_[1–8]" to "Y" at the same
time.
• Availability depends on your phone system.
Value Range
• Y (Enable shared call)
• N (Disable shared call)
Note
• If set to "Y", the SIP server will control the line by using a
shared-call signaling method.
• If set to "N", the SIP server will control the line by using a
standard signaling method.
Default Value
N
Web User Interface Reference Enable Shared Call (Page 105)
176 Administrator Guide Document Version 2010.03.15
4.7.1 Call Control Settings