Filter
Top Products
Value Range
• 0 (No verification of root certificate)
• 1 (Simple verification of root certificate)
• 2 (Precise verification of root certificate)
Note
• If set to "0", the verification of the root certificate is disabled.
• If set to "1", the verification of the root certificate is enabled. In
this case, the validity of the certificate’s date, certificate’s chain,
and the confirmation of the root certificate will be verified.
• If set to "2", precise certificate verification is enabled. In this
case, the validity of the server name will be verified in addition
to the items verified when "1" is set.
Default Value 0
CFG_ROOT_CERTIFICATE_PATH
Value Format String
Description Specifies the URI of the root certificate.
Note
• Changing this setting may require restarting the unit.
Value Range Max. 255 characters
Note
• The format must be RFC 1738 compliant, as follows:
"<schema>://<user>:<password>@<host>:<port>/<url-path>"
– "<user>" must be less than 64 characters.
– "<password>" must be less than 64 characters.
– "<user>:<password>@" may be empty.
– The total of "<schema>://" and "<host>:<port>/<url-path>"
must be less than 128 characters.
– ":<port>" can be omitted if you do not need to specify the
port number.
Default Value Empty string
4.4.5 Time Adjust Settings
NTP_ADDR
Value Format String
Description Specifies the IP address or FQDN of the NTP server.
Value Range Max. 127 characters (IP address in dotted-decimal notation or FQDN)
Default Value Empty string
Web User Interface Reference NTP Server Address (Page 78)
158 Administrator Guide Document Version 2010.03.15
4.4.5 Time Adjust Settings