Filter
Top Products
3.5.3 Change User Password
This screen allows you to change the password used to authenticate the User account when logging in to the
Web user interface.
Note
• For security reasons, the characters entered for the password are masked by special characters, which
differ depending on the Web browser.
• After you change the user password, the next time you access the Web user interface, the
authentication dialog box appears. 2 consecutive login failures will result in an error ("401
Unauthorized"). This restriction only applies the first time you attempt to log in after changing the
password. In all other circumstances, an error occurs after 3 unsuccessful login attempts.
3.5.3.1 Change User Password
New Password
Description Specifies the password to use to authenticate the User account when
logging in to the Web user interface.
Value Range 6–16 characters (except ", &, ', :, <, >, and space)
Default Value Not stored.
Note
• When a user logs in to the Web user interface for the first time,
after clicking OK on the authentication dialog box, the [Change
User Password] screen is displayed automatically to make the
user set a password.
Configuration File Reference USER_PASS (Page 135)
Confirm New Password
Description Specifies the same password that you entered in [New Password] for
confirmation.
Value Range 6–16 characters (except ", &, ', :, <, >, and space)
Note
• This value must be the same as the value entered in [New
Password].
Document Version 2010.03.15 Administrator Guide 75
3.5.3 Change User Password