Filter
Top Products
Value Range
• 1 (Use HTTP 1.0)
• 0 (Use HTTP 1.1)
Note
• For this unit, it is strongly recommended that you specify "1" for
this setting. However, if the HTTP server does not function well
with HTTP 1.0, try changing the setting "0".
Default Value 1
Web User Interface Reference HTTP Version (Page 68)
HTTP_USER_AGENT
Value Format String
Description Specifies the text string to send as the user agent in the header of HTTP
requests.
Value Range Max. 40 characters
Note
• An empty string is not allowed.
• If "{mac}" is included in this parameter, it will be replaced with
the unit’s MAC address in lower-case.
• If "{MAC}" is included in this parameter, it will be replaced with
the unit’s MAC address in upper-case.
• If "{MODEL}" is included in this parameter, it will be replaced
with the unit’s model name.
• If "{fwver}" is included in this parameter, it will be replaced with
the firmware version of the unit.
Default Value Panasonic_{MODEL}/{fwver} ({mac})
Web User Interface Reference HTTP User Agent (Page 68)
HTTP_SSL_VERIFY
Value Format Integer
Description Specifies whether to enable the verification of the root certificate.
Document Version 2010.03.15 Administrator Guide 157
4.4.4 HTTP Settings