Filter
Top Products
Value Range 00:00–23:59
Note
• If the value for this setting is any valid value other than an empty
string, the unit downloads the configuration files at the fixed
time, and the settings specified in "CFG_CYCLIC",
"CFG_CYCLIC_INTVL", and "CFG_RTRY_INTVL" are
disabled.
• If the value for this setting is an empty string, downloading the
configuration files at the fixed time are disabled.
Default Value Empty string
CFG_RESYNC_FROM_SIP
Value Format String
Description Specifies the value of the "Event" header sent from the SIP server to
the unit so that the unit can access the configuration files on the
provisioning server.
Value Range Max. 15 characters
Note
• If the value for this setting is any value other than an empty
string (typically "check-sync" or "resync" is set), the unit will
access the configuration files on the provisioning server when
the SIP server sends an event to notify the unit.
• If the value for this setting is an empty string, the unit will not
access the configuration files on the provisioning server even if
the unit receives a synchronization notification of an event.
Default Value check-sync
Web User Interface Reference Header Value for Resync Event (Page 122)
4.4 Network Settings
4.4.1 IP Settings
CONNECTION_TYPE
Value Format Integer
Description Specifies whether to assign the IP address automatically (DHCP) or
manually (static).
Note
• This setting is available only when "NW_SETTING_ENABLE" is
set to "N".
150 Administrator Guide Document Version 2010.03.15
4.4.1 IP Settings