Filter
Top Products
Value Range
• Y (Use "anonymous.invalid" for host name)
• N (Use normal host name)
Default Value
N
SIP_DETECT_SSAF_[1–8]
Parameter Name Example SIP_DETECT_SSAF_1, SIP_DETECT_SSAF_2, …,
SIP_DETECT_SSAF_8
Value Format Boolean
Description Specifies whether to enable SSAF for the SIP servers (registrar server,
proxy server, and presence server).
Value Range
• Y (Enable SSAF)
• N (Disable SSAF)
Note
• If set to "Y", the unit receives SIP messages only from the
source addresses stored in the SIP servers (registrar server,
proxy server, and presence server), and not from other
addresses. However, if "SIP_OUTPROXY_ADDR_[1–8]" in
4.7.2 SIP Settings is specified, the unit also receives SIP
messages from the source address stored in the SIP outbound
proxy server.
Default Value
N
Web User Interface Reference Enable SSAF (SIP Source Address Filter) (Page 90)
PHONE_NUMBER_[1–8]
Parameter Name Example PHONE_NUMBER_1, PHONE_NUMBER_2, …, PHONE_NUMBER_8
Value Format String
Description Specifies the phone number to use as the user ID required for
registration to the SIP registrar server.
Value Range Max. 24 characters (consisting of 0–9, *, and #)
Note
• No other characters are allowed.
Default Value Empty string
Web User Interface Reference Phone Number (Page 83)
DISPLAY_NAME_[1–8]
Parameter Name Example DISPLAY_NAME_1, DISPLAY_NAME_2, …, DISPLAY_NAME_8
Value Format String
Document Version 2010.03.15 Administrator Guide 195
4.7.2 SIP Settings