Filter
Top Products
Changing Your Settings 141
2.
In Idle mode, press Menu ➔ Settings ➔ Connectivity
➔ Select USB Mode and press the Select soft key or the
key. Use the Up or Down Navigation key to highlight
one of these options:
•
Ask on Connection
: requires the phone to present a “Select
USB Mode” pop-up which requires you to assign a USB application.
•
PC Studio
: is set to launch PC Studio as the default application
when a USB connection is detected. Navigate to
www.samsung.com for a free download of PC Studio.
•
Media Player
: sets the Media Player to launch as the default
application when a USB connection is detected.
•
Mass Storage
: sets the USB connection to a mass storage
device such as a thumb drive or USB drive.
3. Press the Select soft key or the key.
Configuring your Network Profiles
Your phone is wirelessly connecting to the Internet via a built in
WAP browser. Connection can be made via one of the available
WAP browsers: MEdia Net and AT&T MMS (MultiMedia Server).
You need these settings to use the web browser or send MMS
messages or e-mails.
Use this menu to create and customize the profiles containing the
settings for connecting your phone to the network. Although the
active connection can be changed by the user, it is recommended
that this choice be made with the assistance of either the retailer
or customer service representative.
1. In Idle mode, press Menu ➔ Settings ➔ Connectivity
➔ Network Profiles and press the Select soft key or the
key.
2. Highlight one of the following options and press the
View
soft key.
• MEdia Net
• AT&T MMS
Note:
The MEdia Net WAP is pre-configured and cannot be altered on this
screen. The AT&T MMS connection option can be edited, renamed, or
deleted on this screen. Your phone is set up by default for connecting
to the network. If you change the settings without first checking with
your service provider, the web browser, MMS, and e-mail features may
not work properly.
- Or -
Press Options ➔ New, and press the Select soft key or
the key to create a new connection.
3. Select the parameter you want to edit:
•
Set Name
: enter a profile name.
•
Access Name
: edit the access point name.
A657.book Page 141 Friday, February 20, 2009 4:16 PM