Filter
Top Products
80
• Device Name
: Your device’s default name displays on screen.
Touch to change the device name. Available when Bluetooth is
turned On.
•Discoverable
: Control your phone’s visibility to other devices’
Bluetooth searches. Touch to turn On or Off. Available when
Bluetooth is turned On.
• Scan for devices
: Touch to scan for nearby discoverable devices.
After searching, touch a device to pair with it. For more information,
see
“Pairing with a Bluetooth Device”
on page 64.
VPN settings
The VPN settings menu allows you to set up and manage Virtual
Private Networks (VPNs). For more information, refer to “Adding a
VPN connection” on page 65.
Important!:
Before you can use a VPN you must establish and configure one.
Mobile networks
Set options for network selection and data services while
roaming.
Important!:
Depending on your service plan, changes you make to Mobile
Networks settings may incur extra charges. Contact your
Wireless Provider for more information.
1. From the Home screen, press
Menu
➔
Settings
➔
Wireless & networks
➔
Mobile networks
.
2. Set these options:
•3G data
: To activate the data network, this option must be selected.
It is set on by default.
• Data roaming
: Enable or disable connections to data services
when your device is roaming on another network. For more
information about roaming, see
“Roaming”
on page 10.
• System select
: Change the roaming mode for CDMA networks.
–
Cricket only
: Restrict your phone to your home network’s coverage
area. When outside the coverage area, your phone will not roam, and
call functions and other wireless features will not be available.
–
Automatic
: Allow your phone to automatically acquire service based on
default settings, using
your Wireless Provider’s
network and the
networks of roaming partners.
Call settings
North American dialing
When enabled, North American dialing automatically adds the
North American International Dialing Code (011) to international
numbers you dial.
Tip:
Enabling
North American dialing
disables the
International dialing
setting.
ᮣ
From the Home screen, press
Menu
➔
Settings
➔
Call
settings
➔
North American dialing
to enable or disable
North American dialing. A check mark displays in the
check box when enabled.