Filter
Top Products
138
5.
If the network is hidden, tap
This is a hidden network
.
6. If the connection is for an ad-hoc network, tap the
This
device is a device-to-device (ad-hoc) connection
box.
7. Tap the
Next
soft key to continue onto the Authentication
and Data Encryption information. Use the information
provided by your Network administrator to complete this
section and tap the
Next
soft key to continue.
8. Complete the process by selecting the appropriate security
protocol parameters from the
EAP type
drop-down menu.
9. Tap the
Finish
soft key to complete the process.
Changing Connection Information
Using either the Wireless or Network Adapters tabs under
“Network Card,” you can change your connection information. If
your Wi-Fi network encrypts data with a security key (WEP) or
you need WPA authentication to connect to your Wi-Fi network,
you can set the configurations under Wireless tab. The Network
Adapters tab allows you to choose whether you use a fixed IP or
the DHCP (Dynamic Host Control Protocol).
To get the connection information for the Wi-Fi network you are
connected to, follow these steps:
1. Press the
Main Menu
key ,
Settings
➔
Basic
Settings
tab ➔
Wi-Fi Settings
.
2. Tap
Menu
➔
Ms Settings
➔
Network Adapters
tab.
3. The current connection property appears in the
My network
card connects to:
, and displays as either
Internet
or
Work
.
4. Tap
Internet
if the network connects to the Internet (does
not use proxy settings) or
Work
(uses proxy settings).
5. If your Wi-Fi network encrypts data with a security key
(WEP) or you need WPA authentication to connect your
Wi-Fi network, you can set the configuration on the
Wireless
tab.
6. Tap the adapter you wish to change or configure.
7. From the screens that follow, set or change the settings,
and tap to save your changes.