Samsung SCH-U450 Cell Phone User Manual


 
17 Phone Basics
Tip: If the desired entry contains more than one phone number, scroll up or down
to display the number you wish to call and press to make the call.
Using One-Touch/Two-Touch Speed Dialing
You can store up to 98 numbers in your phone’s speed dial memory to make
contacting friends and family as easy as pressing a few buttons. For information on
setting up this feature, see "Speed Dials" on page 28.
With this feature, you can dial Speed Dial entries using one key press for locations
2-9 and two key presses for locations 10-99.
To use One-Touch Dialing for Speed Dial locations 2-9:
Press and hold the appropriate key for approximately two seconds. (The
display confirms that the number has been dialed when it shows the saved
caller ID or number.)
To use Two-Touch Dialing for Speed Dial locations 10-99:
1. Press the first digit.
2. Press and hold the second digit for approximately two seconds. (The
display confirms that the number has been dialed when it shows the
saved call ID or number.)
Note: Your phone also supports 1 to 4 digit dialing. If you enter a number using the
keypad without holding the last number and then press , your phone will dial
those digits.
For example, if you enter and press , it dials 21, not the number
stored in memory location 21.
Answering Voice Calls
Your phone notifies you of incoming calls in the following ways:
The phone rings and/or vibrates.
The backlight illuminates.
The screen displays an incoming call message.
If the incoming call is from a number stored in your Contacts list, the entry’s name
is displayed. The caller’s phone number may also be displayed, if available.
u450_UG.book Page 17 Tuesday, August 25, 2009 4:03 PM