Filter
Top Products
2J. Bluetooth 129
Bluetooth
3. Backspace to erase the old name, and enter a
new name.
4. Tap OK to complete the rename process.
To make your Device visible:
1. Verify your Bluetooth is active.
2. From the Bluetooth settings page, tap Discoverable.
Ⅲ Making your discoverable allows it to be
detected by other device for pairing and
communication.
To scan for Bluetooth Devices:
1. Verify your Bluetooth is active.
2. From the Bluetooth settings page, tap Scan for
Devices to search for visible external Bluetooth-
compatible devices such as headsets, devices,
printers, and computers.
Pairing Bluetooth Devices
Paired Devices
The Bluetooth pairing process allows you to establish
trusted connections between your Galaxy Prevail™ and
another Bluetooth device. When you pair devices, they
share a passkey, allowing for fast, secure connections
while bypassing the discovery and authentication
process.
To pair your device with another Bluetooth device:
1. Verify your Bluetooth is active.
2. From the Bluetooth settings page, tap Discoverable.
Your device must be visible to successfully pair
with an external device.
3. Tap Scan for Devices. (Your device displays a list of
discovered in-range Bluetooth devices, page 128.)
4. Tap a device from the list to initiate pairing.
5. Enter the passkey or PIN code and tap Done > OK.
– or –
Tap
Pair from the onscreen pairing options popup.
Note: Your device is visible for up to 120 seconds
(2 minutes). This value appears as a countdown within
this field.
SPH-M820UM.book Page 129 Monday, May 2, 2011 4:56 PM