Sony T39 Cell Phone User Manual


 
N
o
t
f
o
r
C
o
m
m
e
r
c
i
a
l
U
s
e
E
r
i
c
s
s
o
n
M
o
b
i
l
e
C
o
m
m
u
n
i
c
a
t
i
o
n
s
A
B
Setting up WAP and E-mail 65
GPRS and GSM Data Settings
If you have selected GPRS as the access type, the Preferred service
should be set to GPRS&GSM. An icon may then appear in the
display telling you that GPRS is within range. See Icons on
page 136. If you have selected GSM data as the access type, you
should select GSM only as the preferred service. This setting is valid
for all data accounts.
To select a preferred service
1. Scroll to Settings,
YES, Data comm., YES, Pref. service, YES.
2. Select GPRS&GSM or GSM only.
Tip: To see the status of GPRS coverage and connection, slide the
volume key up or down from standby to enter the Status menu and
then scroll to GPRS.
Data Counters
To check how much data you have sent and received, using GPRS,
scroll to Call info,
YES, Data counters, YES, and select Last session
or Total data.
WAP Profile Settings
When you browse WAP pages, you use a certain WAP profile. A WAP
profile is a collection of settings that determines, for example, how you
connect to the mobile Internet. You could, for example, have one WAP
profile for mobile e-commerce and another one for general WAP
browsing. You can have five WAP profiles. By switching WAP profile,
you also switch settings in a simple way.
There are three ways in which WAP profile settings can be entered
into your phone:
The settings are already entered when you buy the phone.
You receive the settings in a text message, for example, from http:/
/mobileinternet.ericsson.com.
You enter the settings manually.
Note: You may not need to enter all the settings below. Contact your
network operator or service provider (a distributor of WAP pages)
before you start changing the settings yourself.
To enter WAP profile settings manually
1. Make sure you have created a data account between your phone
and the WAP gateway.
2. Scroll to WAP services,
YES, WAP settings, YES.
3. Select the profile that you want to edit and press
YES.