18
Basic Operation
To activate a ‘ Go To’ from the Find Menu:
1. Press the NAV/MOB key.
2. Use the
ARROW KEYPAD to highlight ‘Go To Point’ and press ENTER/MARK. The Find Menu opens.
3. From the Find Menu, highlight ‘Waypoints’ and press
ENTER/MARK. (You may also choose to go to
other points, such as Cities or Tide Stations from this list. The steps vary only slightly from those listed
for the waypoint.)
4. Select a waypoint from the list then press
ENTER/MARK to display the Waypoint Review Page.
5. The Waypoint Review Page automatically opens. With the ‘Go To’ button highlighted, press
ENTER/
MARK
to begin navigation.
Navigate Route
The ‘Navigate Route’ option allows you to easily select a route from a list.
To navigate a route:
1. Press the NAV/MOB key.
2. Use the
ARROW KEYPAD to highlight ‘Navigate Route’ and press ENTER/MARK.
3. Use the
ARROW KEYPAD to highlight the desired route and press ENTER/MARK.
The Active Route Page automatically opens. With the ‘Go To’ button highlighted, press
ENTER/MARK
to begin navigation.
To stop route navigation:
1. Press the NAV/MOB key.
2. Highlight ‘Stop Navigation’ and press
ENTER/MARK.
For information about creating routes, refer to the “Using Routes” section later in this chapter.
Navigating in Marine Mode
Waypoint Review Page
Activating a Go To using the Find Menu
Select Route
Select desired route from list
190-00335-00_0A.indd 18 4/7/2004, 1:50:18 PM
